Για να χρησιμοποιήσει το Ariter, παρακαλώ ακολουθήστε τα εξής βήματα.

        I. Λήψη δεδομένων από το δεκτή στο PC
           
            1. Connect PC and Receiver with RS232 Null Modem (DB9F-DB9F) cable
            2. Turn off power and keep the receiver in standby mode
            3. Press Blue Arrow button on Ariter program
            4. Then, press “74621” on Remote Control to the receiver
            5, It starts receiving data from the receiver to PC
            6. After completing receiving the data, it is opened

    II. Αποστολή δεδομένων από το PC στο δεκτή.
           
            1. Connect PC and Receiver with RS232 Null Modem (DB9F-DB9F) cable
            2. Turn off power and keep the receiver in stand-by mode
            3. Open setting file and press red arrow button on Ariter program
            4. Then, press "24680" on Remote Control to the receiver
            5. It starts sending Data to the receiver

To use Ariter, please follow steps as below.

        I. Receiving Data from Receiver to PC
           
            1. Connect PC and Receiver with RS232 Null Modem (DB9F-DB9F) cable
            2. Turn off power and keep the receiver in standby mode
            3. Press Blue Arrow button on Ariter program
            4. Then, press “74621” on Remote Control to the receiver
            5, It starts receiving data from the receiver to PC
            6. After completing receiving the data, it is opened

    II. Sending Data from PC to Receiver
           
            1. Connect PC and Receiver with RS232 Null Modem (DB9F-DB9F) cable
            2. Turn off power and keep the receiver in stand-by mode
            3. Open setting file and press red arrow button on Ariter program
            4. Then, press "24680" on Remote Control to the receiver
            5. It starts sending Data to the receiver