******* Update at your own risk !!!! *******


********************************************
****** BLUE ICE CAMS Download cards ********
********************************************


- !!!!!!Please Note DownLoad Will Take About 7mins And 25sec Once You Put The Card In The Cam !!!!!

- FOLDER "SHL_NZ_IRD_NAG"
			- This folder contains the binary files to load in the Blue ICE Cams.
			The downloaded firmware is supporting the following CA :
				- SKYCRYPT (Don't panic)
				- IRDETO official cards
				- NZ
				- SHL (NOT SUPPORTING OFFICIAL VIACCESS CARDS IN THIS FILE)
				- IRDETO ALL (Fun cards X in 1)
  				- INC NAGRA BK (auto roll)
				
				FOLDER "Fun 32k" : shl_nz_ird_nag1.bin and shl_nz_ird_nag2.bin 
					
					- You have to load a Fun 4 card (Named Fun4Ird1) with the shl_nz_ird_nag1.bin file
					- You have to load a Fun 4 card (Named Fun4Ird2) with the shl_nz_ird_nag2.bin file

				FOLDER "Fun 64k" : shl_nz_ird_nag64.bin 
					
					- You have to load a Fun 5 card with the shl_nz_ird_nag64.bin

				FILE "Loader.hex" : File to load in the Card flash

- FOLDER "SHL_NZ_IRD"
			- This folder contains the binary files to load in the Blue ICE Cams.
			The downloaded firmware is supporting the following CA :
				- SKYCRYPT (Don't panic)
				- IRDETO official cards
				- NZ
				- SHL (VIACCESS) officical cards
				- IRDETO ALL (Fun cards X in 1) No Bk For Nag
  	
				
				FOLDER "Fun 32k" : shl_nz_ird1.bin and shl_nz_ird2.bin 
					
					- You have to load a Fun 4 card (Named Fun4Ird1) with the shl_nz_ird1.bin file
					- You have to load a Fun 4 card (Named Fun4Ird2) with the shl_nz_ird2.bin file

				FOLDER "Fun 64k" : shl_nz_ird64.bin 
					
					- You have to load a Fun 5 card with the shl_nz_ird64.bin

				FILE "Loader.hex" : File to load in the Card flash


********************************************
*********** DOWNLOAD PROCEDURE *************
********************************************

- Insert the CAM in the satellite receiver then insert the Fun5 card or the first Fun4 card
- Wait for instructions displayed on the TV
- If you are using a fun4 card, it will request you for the second card.
- A successfull message is displayed and you must reboot the decoder if the download is good.
- If the card or the CAM has been extracted, you must restart again a download.


******* Update at your own risk !!!! *******