******* Update at your own risk !!!! ******* ******************************************** ******* RED ICE CAMS Download cards ******** ******************************************** - !!!!!!Please Note DownLoad Will Take About 7mins And 25sec Once You Put The Card In The Cam !!!!! - FOLDER "SHL_IRD" - This folder contains the binary files to load in the RED ICE CAMS The downloaded firmware is supporting the following CA : - SKYCRYPT (Don't panic) - SHL (VIACCESS) - IRDETO ALL (Fun cards X in 1) FOLDER "Fun 32k" : shl_ird1.bin and shl_ird2.bin - You have to load a Fun 4 card (Named Fun4Ird1) with the shl_ird1.bin file - You have to load a Fun 4 card (Named Fun4Ird2) with the shl_ird2.bin file FOLDER "Fun 64k" : shl_ird64.bin - You have to load a Fun 5 card with the shl_ird64.bin FILE "Loader.hex" : File to load in the Card flash - FOLDER "SHL_NAG" - This folder contains the binary files to load in the RED ICE Cams. The downloaded firmware is supporting the following CA : - SKYCRYPT (Don't panic) - SHL (VIACCESS) - NAGRA (Fun cards Nagra auto roll) FOLDER "Fun 32k" : shl_Nag1.bin and shl_Nag2.bin - You have to load a Fun 4 card (Named Fun4Nag1) with the shl_Nag1.bin file - You have to load a Fun 4 card (Named Fun4Nag2) with the shl_Nag2.bin file FOLDER "Fun 64k" : shl_Nag64.bin - You have to load a Fun 5 card with the shl_Nag64.bin FILE "Loader.hex" : File to load in the Card flash ******************************************** *********** DOWNLOAD PROCEDURE ************* ******************************************** - Insert the CAM in the satellite receiver then insert the Fun5 card or the first Fun4 card - Wait for instructions displayed on the TV - If you are using a fun4 card, it will request you for the second card. - A successfull message is displayed and you must reboot the decoder if the download is good. - If the card or the CAM has been extracted, you must restart again a download. ******* Update at your own risk !!!! *******